skil-care-corporation
Results: 117
Leg Contracture Pad (Models 703080 &703082)
The Leg Contracture Pad is a legrest panel designed for use by individuals who use wheelchairs and whose legs are in flexion contracture. This unit fits between the legrests between the seat and the footplates and has a firm foam-padded plywood base covered in wipe-clean vinyl. DIMENSIONS: Model 703080 feets 16-inch wheelchairs and model 703082 fits 18-inch wheelchairs.
Stop-Strip
The Stop-Strip is a wandering patient system designed to direct individuals with Alzheimer's Disease or other cognitive disabilities away from exit doors, stairwells, and other dangerous areas. This strip affixes to the door frame with Velcro and extends across the door, creating a visual barrier. COLOR: Blaze orange or bright yellow.
Finger Separator Mitts (Model 306130)
The Finger Separator Mitts, model 306130, are restraint mitts designed to prevent individuals with cognitive or behavioral disabilities from injuring themselves or removing tubing. These padded mitts have separate finger channels to spread and hold the wearer's fingers to control contractures. The launderable mitts have a CooLine Mesh top to promote air circulation and reduce hand perspiration. Separate tie straps to assist in restricting arm movements are included. SIZES: Universal. DIMENSIONS:
Comfort Cuff (Model 306010)
The Comfort Cuff, model 306010, is a wrist or ankle restraint designed to prevent individuals with cognitive or behavioral disabilities from injuring themselves. Made of high-pile synthetic sheepskin, these launderable restraints have non-slip buckles that remain secure despite pulling by the wearer and extra-long straps to secure the restraints to a bed or wheelchair beyond the wearer's reach. SIZES: Universal.
Gait Belt (Series 2520)
The Gait Belt, series 2520, is designed to aid in transfering or in ambulation training with individuals with mobility disabilities. These belts are available in standard and heavy-duty cotton webbing with a choice of metal or lightweight Delrin buckles. DIMENSIONS (WxL): 2 x 60 inches. COLOR: White or pastel stripe.
Heel / Elbow Protector (Models 503203, 503204, & 503205)
The Heel/Elbow Protector is designed to protect the heels and elbows from pressure sores, friction burns, and abrasions. The built-in soft polyfoam pad is contoured to completely cover the heel, elbow, or knee. The protector's oversized stockinette sleeve keeps the pad properly positioned without constriction. SIZES: Small, medium, or large. COLOR: Color-coded for size.
Foot Elevator (Models 503100 & 503140)
The Foot Elevator is a heel protector designed for use by individuals who are in bed for extended periods. This doughnut-style device lifts the heel off the bed to prevent pressure sores and shearing. The design permits air circulation to aid in the healing of existing sores. This device is covered with perspiration-absorbing fabric, eliminating the need for a separate inner liner, and the Velcro closures provide for easy and secure application. DIMENSIONS: Model 503100 is four inches wide and m
Heel Cushion (Model 503040)
The Heel Cushion, model 503040, is a heel protector designed to prevent pressure sores for individuals who are in bed for extended periods. These cushions have extra-thick foam padding and are covered with perspiration-absorbing fabric. Velcro closure straps provide secure positioning. These cushions have high sides to protect the ankles. SIZES: Universal.
Stay-On Heel Protector (Model 503050)
The Stay-On Heel Protector, model 503050, is designed to prevent preesure sores for individuals who are in bed for extended periods. Made of two layers of synthetic sheepskin, this launderable protector has high sides to protect the ankles and a strap with a slide-lock buckle to prevent the protector from being kicked off. SIZES: Universal.
Foam Heel Protector (Models 503070 & 503080)
The Foam Heel Protector is designed to relieve pressure and prevent pressure sores for people who are in bed for extended periods. Made of polyfoam, these oversized protectors have high sides to protect the ankle and Velcro closure straps to keep them in position. Model 503070 is made of standard foam and model 503080 is made of convoluted foam. SIZES: Universal.
Soft Boot (Model 503160)
The Soft Boot, model 503160, is a heel protector designed to prevent pressure sores for people who are in bed for extended periods. Made of soft, plush, synthetic sheepskin, this boot secures with four Velcro straps and provides protection for the heel, the ankle, and the lower calf. This launderable boot has large vent holes to promote air circulation and reduce perspiration and moisture build up. SIZES: Universal.
Elbow Protector (Model 503310)
The Elbow Protector, model 503310, is designed to protect against friction burns and pressure sores. Made from soft, synthetic sheepskin, the launderable protector extends above and below the elbow and is held in place by two Velcro closure straps. SIZES: Universal.
Leg Separator Pad (Models 503420, 503460, & 503480)
The Leg Separator Pad is a leg positioner designed to provent skin irritation due to leg scissoring, rubbing, and moisture for people with lower extremity disabilities. These launderable pads are made of synthetic sheepskin and are held in place with Velcro closure straps. Model 503420 is a thigh pad, model 503460 is a knee pad, and model 503480 is a full-leg pad. DIMENSIONS: The thigh pad is 9 x 15 inches, the knee pad is 15 x 15 inches, and the full leg pad is 15 x 24 inches.
Synthetic Sheepskin Pads
Synthetic Sheepskin Pads are mattress pads designed to prevent pressure sores for people who are in bed for extended periods. These launderable pads are soft and permit air circulation beneath the user. DIMENSIONS: These pads are available in 30 x 24 inches, 30 x 40 inches, 30 x 60 inches, and on rolls of 30 x 360 inches.
Vinyl Bed Rail Pads (Series 4010 & 4011)
The Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS (HxTxL): Available in 15 x 1 x 60 inches, 15 x 1 x 72 inches, 15 x 1 x 80 inches, 15 x 2 x 60 inches, 15 x 2 x 72 inches, or 15 x 2 x 80 inches.
Cushion-Top Vinyl Bed Rail Pads (Models 401210, 401220, & 401230)
The Cushion-Top Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Added cushioning is provided on the top and inside of the rails. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS: Model 401210 is 60 inches long, model 401220 is 72 inches long, and model 401230 is 80 inches long.
Thru-View Vinyl Bed Rail Pads (Models 401015 & 401045)
The Thru-View Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These pads feature clear vinyl plastic windows to reduce the feeling of isolation.These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS: Model 401015 is 60 inches long and model 401045 is 72 inches long.
Elevating Bed Wedges (Series 5530)
The Elelvating Bed Wedges, series 5530, are positioning wedges designed to elevate the head or legs of individuals with breathing, circulatory, lower extremity, or back disabilities. These foam wedges are available with or without a cloth covers. DIMENSIONS: 7.5 x 27 x 24 inches, 10 x 27 x 24 inches, or 12 x 27 x 24 inches.
Walker Belt (Models 251011 & 251022)
The Walker Belt is a gait belt designed for use with individuals with mobility disabilities during ambulation training. This nylon belt has handles on each side and at the back to enable a therapist to provide assistance. This belt features a strong Delrin buckle. SIZES: Model 251011 is a small-medium to fit waists 28 to 34 inches and model 251022 is a medium-large to fit waists 35 to 44 inches. DIMENSIONS: Two inches wide.
Cushion Grip
The Cushion Grip is a hand cone designed for use by individuals who have had strokes or who have other disabilities that cause involuntary hand closure. Tapered to the natural contour of the hand, this cloth-covered grip is filled with resilient polyester pile. An elastic band secures the machine-launderable cone to the hand. This device provides mild hand exercise and prevents fingernails from digging into the palm of the hand.
Cone Grip
The Cone Grip is a hand cone designed for use by individuals who have had strokes or who have other disabilities that cause involuntary hand closure. Shaped to the natural contour of the hand, this cloth-covered grip has a firm surface to keep the hand open without stimulating contractures. An elastic band secures the cone to the hand. The cloth cover is removable and launderable.
Finger Contracture Cushion
The Finger Contracture Cushion is a hand positioner designed to prevent finger contacture for individuals who have had strokes or other neurological disabilities. This soft, resilient anticontracture aid separates the fingers and keeps the hand open. This cushioned aid features an elastic band to secure it to the hand and it is covered in perspiration-absorbing fabric.
Slip-Grip Nonslip Matting (Models 909250, 909251, & 909252)
The Slip-Grip Nonslip matting is designed to prevent cushions from sliding off wheelchairs or plates and glasses from sliding on trays. The mat can be cut to size and used used between the wheelchair seat and the cushion, used on tables or trays to keep plates and cups steady, or to hold craft items or tools in place. DIMENSIONS: Rolls of 12 x 120 inches. COLOR: Model 909250 is blue, model 909251 is green, and model 909252 is raspberry.
Catheter Leg Strap
The Catheter Leg Strap is a catheter strap designed to reduce accidental dislocation of catheters. The cloth-backed foam band wraps around the wearer's leg, holding the catheter tube in place using a Velcro tab. DIMENSIONS: 30 inches long.
Smoker's Apron (Model 906010)
The Smoker's Apron, model 906010, is a fireproof apron designed to protect individuals with upper extremity or cognitive disabilities from burns or accidental fires due to smoking. This full-sized, lightweight apron covers the wearer's lap and chest and is designed to prevent smoking materials from falling between the chair or wheelchair and the wearer. SIZES: Universal.
Shower / Toilet Safety Belt (Model 909110)
The Shower/Toilet Safety Belt, model 909110, is a belt restraint designed to prevent individuals with mobility or balance disabilities from sliding while on the toilet, commode, or shower chair. This belt attaches to shower or bath seats and commode or toilet safety frames without tools and has a buckle closure. The belt is manufactured without metal or natural fibers and will not rust or mildew. SIZES: Universal.
Trach Tube Holder (Model 904110)
The Trach Tube Holder, model 904110, is a tracheostomy tube holder designed to secure tracheostomy tubes in position. This nonallergenic, adjustable foam collar holds the trach tube flange in place with Velcro fasteners. SIZES: Universal.
Trach Tube Ties (Models 904150 & 904151)
The Trach Tube Ties are tracheostomy tube holders designed to secure tracheostomy tubes in position. These non-irritating adjustable foam collars hold the trach tube flange in place with Velcro fasteners. SIZES: Model 904150 is small-medium and fits neck from 8 to 18 inches in diameter and model 904151 is a medium-large and fits necks 16 to 23 inches in diameter.
Bi-Level Footrest Extender (Series 7033)
The Bi-Level Footrest Extender is designed for use by people who use wheelchairs and who have leg-length discrepancy. The extenders can be selected in a right-left or left-right combination and they feature a vertical centerboard which prevents the feet from crossing over and a padded legrest to prevent the feet from slipping off the footrests. DIMENSIONS: The extenders are available in a choice of 16 or 18 inches wide and with 1- and two-inch pads, 1- and 3-inch pads, 1- and 4-inch pads, 2- and
Locator Alarm (Model 909210)
The Locator Alarm is a wandering patient system designed to enable caregivers to locate individuals who are prone to falls and have left their wheelchairs. This lightweight alarm is worn around the waist on a special belt that is not easily removable and is concealed in an attached protective pouch that is not easily accessible to persons with disabilities. The belt features a buckle that is concealed once it is secured. The alarm signal is decibel-controlled in order to make it auditory for sta
Wheelchair Leg Pad (Model 703070)
The Wheelchair Leg Pad, model 703070, is a legrest panel designed to prevent the user's legs from sliding off the footrests. These one-piece rigid-backed, vinyl-covered pads fit the entire width of the opening between the chair's legrests, preventing leg contact with metal wheelchair parts and providing comfort and cushioning when legrests are raised. These pads are designed for spray and wipe cleaning.
Thru-View Urinary Drainage Bag Holder (Model 102015)
The Thru-View Urinary Drainage Bag Holder, model 102015, is a catheter collection bag cover designed for use by individuals with urinary catheters who use wheelchairs. This bacteriostatic vinyl bag hangs below wheelchair seats and geri chairs or from bed rails with the attached Velcro straps and conceals the collection bag and stores tubing. A narrow clear vinyl window permits monitoring of the fluid level without removing the drainage bag. SIZES: One size accommodates all drainage bags.
Skil-Care Wheelchair Backrest Cushion (Model 703063)
The Wheelchair Backrest Cushion, model 703063, is a foam back cushion designed for use with wheelchairs. This firm-backed foam-padded cushion is covered in easy-clean vinyl and features tie cords to secure the cushion to the wheelchair push handles. DIMENSIONS: Fits 18 inch wheelchairs.
Shower Poncho (Models 909120, 909130, 909140, & 909150)
The Shower Poncho is a men's or women's robe designed for use by individuals who use wheelchairs. Model 909120 features a short back; model 909130 has a long back; model 909140 has a long back and a hood; and model 909150 has a short back and a hood.
Skil-Care Ultra Wedge (Series 7541)
The Skil-Care Ultra Wedge is a foam or gel and foam seat cushion designed to provide a firm seating foundation and sliding control for people who use wheelchairs. Available in a foam model or in a foam and gel model for maximum pressure relief, these cushions have a fixed wedge shape that resists compression and straps that secure the cushion to the chair. The gel and foam model features a self-contained chamber of endothermic gel on top of foam for even weight distribution. The foam model comes
Skil-Care Ultra Cushion (Models 754310, 754320, & 754330)
The Skil-Care Ultra Cushion is a foam or gel and foam seat cushion designed to provide a firm seating foundation for people who use wheelchairs. Available in a foam model or in a foam and gel model for maximum pressure relief, these cushions have a non-compressing firm foundation and a contoured base that rests below the seat frame to enable users to sit lower in the chair. The attached straps secure the cushion to the chair. The gel and foam model features a self-contained chamber of endothermi
Pressure-Check Foam Cushion With Coccyx Cutout (Model 754525)
The Pressure-Check Foam Cushion with Coccyx Cutout, model 754525, is a foam seat cushion designed to relieve pressure on the coccygeal area for people who use wheelchairs. Pressure-Check foam has sections that adjust to the user for uniform pressure distribution. The cushion also features a firm contoured foundation to reduce sling-seat hammocking and spinal pressure. The spray-and-wipe clean nylon cover has straps to secure the cushion to the wheelchair. DIMENSIONS: 16 x 18 x 4 inches.
Skil-Care Slide-Guard Cushion (Series 7512)
The skil-Care Slide-Guard Cushion, series 7512, is a foam or gel and foam seat cushion designed to reduce sliding for wheelchair users. Available in a gel and foam model, a foam model, or in a gel and foam Ultra Cushion model or a foam Ultra Cushion model (see also separate entry), these cushions are sealed in incontinence-proof vinyl and feature safety straps to secure the cushion to the chair. The Ultra Cushion models have a firm contoured base to eliminate sling-seat hammocking. The foam cush
Skil-Care Slide-Guard Wedge (Series 7513)
Skil-Care Slide-Guard Wedge, series 7513, is a foam or gel and foam seat cushion designed to reduce sliding for wheelchair users. Available in a gel and foam model, a foam model, or in a gel and foam Ultra Cushion model or a foam Ultra Cushion model (see also separate entry), these cushions feature a wedge shape and a pommel and are sealed in incontinence-proof vinyl and feature safety straps to secure the cushion to the chair. The Ultra Cushion models have a firm contoured base to eliminate sli
Alarm Cushion (Models 754410, 754420, & 754430)
The Alarm Cushion is a foam or gel and foam seat cushion designed for use with geri chairs. This cushion features a built-in weight sensor factory sealed inside a vinyl compartment in the cushion to protect it from urine and wear and to prevent it from shifting beneath the user's weight. When the user's weight is removed as they attempt to leave the chair or as a result of sliding, an alarm sounds.
Econo-Gel Pad (Models 751150, 751151, 751154, & 751155)
The Econo-Gel Pad is a single chamber gel flotation seat cushion designed for use in wheelchairs. This cushion combines heat-dissipating and pressure-reducing gel with a foam pad. All models are factory sealed in vinyl. Models 751150 and 751151 also include a launderable fabric cover. DIMENSIONS: Models 751150 and 751154 are 16 x 16 x 2 inches and models 751151 and 751155 are 16 x 18 x 2 inches.
Skil-Care Incontinent Resistant Foam Cushion
The Skill-Care Incontinent Resistant Foam Cushions are foam seat cushions designed for use in wheelchairs or geriatric chairs. These high-density foam cushions provide sitting comfort and pressure relief and may be purchased without a cover, with a vinyl cover, or with a nylon cover. Safety ties are included to prevent sliding off the chair. DIMENSIONS: Available in 16 x 18 x 2 inches, 16 x 18 x 3 inches, or 16 x 18 x 4 inches.
Wheelchair Wedge (Series 7540)
The Wheelchair Wedge is a foam or gel and foam wheelchair seat cushion designed to prevent user sliding in the chair. Offered in foam or foam and gel with a choice of a soft or firm foundation, the Wedge can be ordered with a polyester cover, an incontinence-proof vinyl cover, or with the vinal cover and a launderable fabric cover. The vinyl-covered wedge has a top and bottom of different colors as a reminder to reposition periodically. DIMENSIONS: Available in 16 x 18 x 6 x 3 inches or 16 x 18
Leg Abductor Cushion (Models 758010, 758015, 758020, & 758025)
The Leg Abductor Cushion is a gel and foam or foam seat cushion with a built-in foam pommel to provide leg separation for individuals who use wheelchairs. The mattress features a safety strap that keeps the cushion in place, and a fluid-proof, wipe-clean vinyl cover to prevent against incontinence. Model 758010 is a foam cushion with a level base and model 758015 is gel and foam cushion with a level base. Model 758020 is foam with a wedge base and model 758025 is gel and foam with a wedge base.
Wheelchair Leveling Pad (Models 757010 & 757015)
The Wheelchair Leveling Pad is a solid seat insert designed for use in wheelchairs. This solid, closed-cell foam pad makes wheelchair sling seats flat and level with the seat frame. This pad can be used as a foundation for other cushions. Model 757010 does not have a cover and model 757015 includes a vinyl cover. DIMENSIONS: Both models are 16 x 18 inches.
Adjusta-Loop Cushion Belt (Model 301202)
The Adjusta-Loop Cushion Belt, model 301202, is a belt restraint designed to prevent individuals from leaving a wheelchair or sliding in the chair. This launderable foam-padded belt has securing loops that slip over the wheelchair kickspurs. Slider buckles adjust the webbing to fit the user. SIZES: Universal.
Econo-Belt (Model 701020)
The Econo-Belt, model 701020, is a belt restraint designed to prevent individuals from leaving or sliding in a wheelchair. This nylon belt attaches to the wheelchair kickspurs and slider buckles enable customized fit to the wearer. DIMENSIONS: Two inches wide.
Shoulder Strap Poncho (Models 302011, 302012, 302021, & 302022)
The Shoulder Strap Poncho is a vest restraint designed to prevent individuals who use wheelchairs from leaning forward or laterally. The poncho's shoulder straps secure to the wheelchair push handles and the waist straps secure to the kickspurs. Models 302011 and 302012 are made of poly weave and models 302021 and 302022 are made of CooLine Mesh. SIZES: Models 302011 and 302021 are small-medium and models 302012 and 302022 are medium-large.
Double Support Poncho (Models 302051, 302052, 302061, & 302062)
The Double Support Poncho is a vest restraint designed to prevent individuals who use wheelchairs from leaning forward or laterally. The poncho's shoulder straps secure to the wheelchair push handles and the waist straps secure to the kickspurs. A strap across the chest secures around the chair for additional support. Models 302051 and 302052 are made of poly weave and models 302061 and 302062 are made of CooLine Mesh. SIZES: Models 302051 and 302061 are small-medium and models 302052 and 302062
Shoulder Strap Vest (Models 302101, 302102, 302103, 302111, 302112 & 302113)
The Shoulder Strap Vest is a cross-over vest restraint designed to prevent individuals who use wheelchairs from leaning forward or laterally. The poncho's shoulder straps secure to the wheelchair push handles and the waist straps secure to the kickspurs. Models 302101, 302102, and 302103 are made of poly weave and models 302111, 302112, and 302113 are made of CooLine Mesh. SIZES: Models 302101 and 302111 are small, models 302102 and 302112 are medium, and models 302103 and 302113 are large.
Slider Poncho (Models 303011, 303012, 303021, & 303022)
The Slider Poncho is a vest restraint designed to prevent individuals who use wheelchairs from sliding, leaning forward, or leaning laterally. An attached foam-padded crotch piece prevents sliding. A chest strap provides posture support, and angled waist strap reduces pelvic tilt that contributes to sliding. The vest includes a removeable, launderable urine-proof crotch pad cover. Models 303011and 303012 are made of poly weave and models 303021 and 303022 are made of CooLine Mesh. SIZES: Models
Pelvic Holder (Models 303311, 303312, 303321, & 303322)
The Pelvic Holder is a pelvic restraint designed to prevent individuals who use wheelchairs from sliding, leaning forward, or leaning laterally. The tapered hour-glass design fits comfortably between the user's legs and a waist strap secures behind the wheelchair. Models 303311and 303312 are made of poly weave and models 303321 and 303322 are made of CooLine Mesh. SIZES: Models 303311 and 303321 are small-medium and models 303312 and 303322 are medium-large.
Cushion Slider Belt (Model 303210)
The Cushion Slider Belt, model 303210, is a belt restraint designed to prevent people who use wheelchairs from sliding. This foam-padded belt secures at the waist and includes a soft, padded crotch piece to help prevent sliding. A removable urine-proof crotch pad cover is included. SIZES: Universal.
Sleeved Jacket (Series 3042)
The Sleeved Jacket, Series 3042, is a jacket restraint designed to prevent individuals with cognitive or behavioral disabilities from leaving a wheelchair without assistance. This restraint features back zipper closure, short sleeves to make it more difficult for the wearer to remove the restraint, shoulder straps that secure to the wheelchair push handles to provide posture support, and a waist strap that secures behind the chair. This restraint is available in poly weave or CooLine Mesh. SIZES
Overlap Wheelchair Belt (Model 701040)
The Overlap Wheelchair Belt, model 701040, is a belt restraint designed to prevent people who use wheelchairs from sliding in the wheelchair. The size-adjustable nylon belt criss-crosses over the wearer's lap to reduce the pelvic tilt that contributes to sliding. DIMENSIONS: The belt is two inches wide.
Sleeved Jacket With Slider Control (Series 3043)
The Sleeved Jacket, Series 3043, is a jacket restraint designed to prevent individuals with cognitive or behavioral disabilities from leaving a wheelchair without assistance. This restraint features back zipper closure, short sleeves to make it more difficult for the wearer to remove the restraint, shoulder straps that secure to the wheelchair push handles to provide posture support, and a waist strap that secures behind the chair. A foam padded crotch piece prevents sliding and includes a remov
Houdini Safety Sleeper (Series 3050)
The Houdini Safety Sleeper, series 3050, is a body restraint designed to prevent individuals with cognitive or behavior disabilities from exiting the bed unattended. This sleeved zipper-back jacket restraint features a strap between the legs to prevent sliding down in the bed and a roll-about waist strap enables the wearer to sleep in any position. The straps secure under the bed. Models are available in poly weave or in CooLine Mesh. SIZES: Both the poly weave and CooLine Mesh styles are availa
Sleeper Jacket (Series 3051)
The Sleeper Jacket, Series 3051, is a jacket restraint designed to prevent individuals with cognitive or behavioral disabilities from leaving a bed without assistance. This restraint features short sleeves to make it more difficult for the wearer to remove the restraint and a waist strap that enables the wearer to sleep in any position and secures under the bed. This restraint is available in poly weave or CooLine Mesh. SIZES: Both the poly weave and CooLine Mesh models are available in small, m
Support Vest (Series 30231 & 30232)
The Support Vest, Series 30231 and 30232, is a vest restraint designed to prevent individuals with cognitive or behavioral disabilities from leaving a bed without assistance. This sleeveless restraint features a wide abdominal belt that secures under the bed and provides abdominal support. This restraint is available in poly weave or CooLine Mesh. SIZES: Both the poly weave and CooLine Mesh models are available in small, medium, large, and extra large.
Cushion Belt (Model 301200)
The Cushion Belt, model 301200, is a belt restraint designed to prevent individuals with cognitive and behavioral disabilities from leaving a bed without assistance. The foam padded belt enables the wearer to roll from side to side and the extra-long strap secures under the bed. SIZES: Universal.
Rigid Palm Padded Mitts (Model 306115)
The Rigid Palm Padded Mitts, model 306115, are restraint mitts designed to prevent individuals with cognitive or behavioral disabilities from injuring themselves or removing tubing. These padded mitts have rigid inserts to prevent the wearer from grabbing intravenous or nasogastric tubes. Separate finger channels spread and hold the wearer's fingers to control contracture. The launderable mitts have a mesh top to promote air circulation. SIZES: Universal. DIMENSIONS: Two inches thick.
Padded-Plus Mitts (Model 306120)
The Padded-Plus Mitts, model 306120, are restraint mitts designed to prevent individuals with cognitive or behavioral disabilities from injuring themselves or removing tubing. These padded mitts have easy-to-secure closures. The launderable mitts have a mesh top to promote air circulation. Separate tie straps to assist in restricting arm movements are included. SIZES: Universal. DIMENSIONS: Two inches thick.
Lift-Off Lap Cushion (Model 307050)
The Lift-off Lap Cushion, model 307050, is a lap tray designed to provide individuals who use wheelchairs with proper positioning and a work surface. This cushion is held in place with Velcro two closures that wrap around the front armrest posts and which are easily released by the act of rising from the chair; the closures also feature easy-to-grasp, easy-to-see loops which provide the user with the option of removing the cushion before rising. Covered in durable, liquid proof vinyl, the foam-p
Soft-Fall Bedside Mat (Model 911530)
The Soft-Fall Bedside Mat, model 911530, is a fall mat designed to protect individuals who are prone to falling out of bed or while entering or exiting the bed and/or who have osteoporosis. This thick, high-density foam pad is designed to be placed beside the bed and it is sized to slide under the bed between the wheels when not in use. Covered in vinyl, the pad wipes clean with a damp cloth and spray cleanser. DIMENSIONS (LxWxH): 68 x 36 x 4 inches.
In-Bed Patient Positioning System (Model 55036)
The In-Bed Patient Positioning System is a transfer aid designed to aid in positioning and turning individuals who spend extended periods in bed. The system includes a positioning pad with handles and two wedges that support the individual in the desired position. The pad features three layers: a poly-cotton top layer to wick away urine and other moisture, an absorbent foam center layer, and a liquid-proof vinyl barrier to protect the bed. The vinyl-covered bolsters support the side-lying indivi
Slide-Stopper Belt (Model 610320)
The Slide-Stopper Belt, model 610320, is a belt restraint designed to prevent wheelchair users from sliding down in the chair. Made of wipe-clean vinyl, this belt fastens across the thighs with Velcro to stabilize the hips and thighs. This belt secures to the chair using the chair's existing screws. SIZES: One size.
Reident-Release Slider Belt (Models 610310 & 610315)
The Resident-Release Slider Belt is a belt restraint designed to prevent wheelchair users from sliding down in the chair. Two nylon criss-cross the user's lap to prevent sliding forward. Model 610310 features standard Velcro closure and model 610315 features Velcro closure with a red hand loop. Both models secure to a wheelchair using the chair's existing screws. SIZES: One size.
Resident-Release Three-Point Wheelchair Belt (Models 610210 & 610215)
The Resident-Release Three-point Wheelchair Belt is a wheelchair seatbelt designed to provide security and positioning assistance. This automotive style-belt is a combination lap and shoulder belt that secures to the wheelchair using the existing screws. Model 610210 has side-release buckle closure and model 610215 has a user-friendly buckle. SIZES: One size fits most.
Resident-Release Bed Belt (Series 6104)
The Resident-Release Bed Belt is a belt restraint designed to remind individuals with cognitive disabilities who are at risk of falling that they require assistance getting out of bed. This belt is designed to enable the individual to sleep comfortably in any position while the belt is in use. The belt is available with a choice of standard Velcro closure or Velcro closure with a red hand loop. SIZES: Small-medium and medium-large.
Skil-Care Removable Wheelchair Lap Trays (Series 7050)
Skil-Care Removable Wheelchair Lap Trays, series 7050, are designed to provide a work and feeding surface and positioning support for people who use wheelchairs. Available styles include a long-lasting Dura-Tray, a clear tray, an Econo-Tray, and a padded SofTop Tray. The SofTop Tray is available in an adult or a child's model. All trays feature straps that secure around the chair with easy-open closures. OPTIONS: Replacement straps. DIMENSIONS: The child's SofTop Tray is 19 x 22 inches.
Lateral Body Support (Series 7060)
The Lateral Body Support is a lateral trunk support designed for use by individuals who use wheelchairs or geri chairs. These vertical supports stabilize the torso to provide positioning support to reduce leaning to the left or right. The supports feature a built-in armrest trough. These supports are available with a choice of three covers: launderable synthetic sheepskin, launderable polyester, and spray-and-wipe clean nylon. DIMENSIONS: Available in a choice of 12.75 or 14 inches high.
Wheelchair Lumbar Support(Models 703065 & 703066)
The Wheelchair Lumbar Support is a lumbar support designed for use in wheelchairs. The foam core is covered in easy-clean vinyl. The attached straps hold the support securely in place. Model 703065 is a half-round and model 703066 is a full-round. SIZES: One size fits 16- and 18-inch chairs. DIMENSIONS: The half-round is 2.5 inches in diameter and the full-round is 5 inches in diameter.
Elevated-Arm Lateral Support (Models 706020 & 706021)
The Elevated-Arm Lateral Support is a combination lateral trunk support and elevating armrest designed for use by individuals who use wheelchairs or geri chairs. This support, which comes with a launderable synthetic sheepskin cover, helps reduce leaning to one side while permitting the arm to be elevated to control edema. Model 706020 is a right-handed model and model 706021 is a left-handed model. DIMENSIONS: Both models are 12.75 inches high at the lowest point.
Lateral Stabilizer Armrest Bolsters (Series 7061)
The Lateral Stabilizer Armrest Bolsters are lateral trunk supports designed for use by individuals who use wheelchairs. These bolsters fit over the wheelchair armrests to reduce lateral leaning and provide cushioned support for the arms. The bolsters come in a choice of three covers--launderable polyester, launderable synthetic sheepskin, and spray-and-wipe clean nylon--and are available in models for full- and desk-length armrests. DIMENSIONS: Available in a choice of 5 or 6 inches wide.
Arm Tray Lateral Stabilizer (Models 706140, 706141, & 706142)
The Arm Tray Lateral Stabilizer is a combination lateral trunk support and arm trough designed for use by individuals who use wheelchairs. This foam-padded stabilizer fits wheechairs with full-length arms and reduces lateral leaning while providing improved arm positioning. Model 706140 has a washable polyester cover, model 706141 has a washable synthetic sheepskin cover, and model 706142 has a spray-and-wipe clean nylon cover.
Mobile Arm Support (Series 7062)
The Mobile Arm Support, series 7062, is a hand orthosis and elbow support designed for use by individuals with upper extremity disabilities who use wheelchairs. Available in models for the right or left arm, and in a choice of level or elevated support, the units rests on the wheelchair arm and includes straps to maintain proper arm positioning. Covered in spray-and-wipe clean nylon, the removable arm trough is constructed of high-density foam for comfort.
Custom Thoracic Lumbar Sacral Orthosis
The Custom Thoracic Lumbar Sacral Orthosis is a spinal orthosis designed to promote an upright sitting posture for individuals who use wheelchairs. Custom manufactured to the dimensions of the user, this device is designed for individuals who cannot tolerate support under the axilla and provides anterior-posterior-lateral rotary contro and prevents trunk hyperextension. The system includes a choice of one of six cushions for specific seating needs.
Lateral Support Orthosis (Series 7022)
The Lateral Support Orthosis is a lateral trunk support designed for use by individuals who use wheelchairs. Designed to facilitate an erect sitting posture, this orthosis is made of contoured plastic foam, padded with foam for comfort, and covered with a durable spray-and-wipe clean cover. The orthosis accommodates all torso heights and the lateral support wings can be adjusted by adding foam to the wing pockets or by warming the plastic frame with a heat gun and adjusting the wings. The foam
Snug Supports (Models 706310 & 706311)
The Snug Supports are lateral trunk supports designed for use by individuals who use wheelchairs. These supports are placed inside the wheelchair to provide support and reduce lateral leaning. They also serve to reduce the interior space in the chair, adapting a standard chair for the needs of a smaller user. These supports feature a foam-padded plywood frame and a spray-and-wipe clean vinyl cover. Adjustable straps permit attachment to any wheelchair. Model 706310 is a pair of supports and mod
Wheelchair Side Wings (Models 706320 & 706322)
The Snug Supports are lateral trunk supports designed for use by individuals who use wheelchairs and lean bilaterally. These rigid-frame wings are padded with foam and covered in wipe-clean vinyl and attach to most wheelchairs, providing support at the shoulder level. Model 706320 is the Standard Support model. Model 706322 is the X-tra Support model which features integral armrest pads which fasten the bottom of the wings to the wheelchair armrest frame to provide additional support for larger
Lap Top Cushion (Series 307010 Through 307014 & 307030 Through 307034)
The Lap Top Cushion is a lap tray designed to provide individuals who use wheelchairs with proper positioning and a work surface. Covered in durable, liquid-proof vinyl, these polyfoam-padded cushions serve as an armrest, a means of carrying personal items, a work surface, and a tool for promoting a more upright sitting posture. Available in three thicknesses, models are offered for wheelchairs with full- or desk-length arms and fit across the user's lap under the chair's armrests. The models fo
Skil-Care Wheelchair Posture Support (Series 61011)
The Skil-Care Wheelchair Posture Support, series 61011, is a harness restraint designed to promote proper posture for wheelchair users by limiting lateral and forward leaning. The harness attaches to the wheelchair and loops over the shoulderd and under the user's arms. Models are available with standard Velcro closure or with Velcro closures with red hand loops for ease in grasping and visibility. SIZES: Small-medium and medium-large.
Drop-Stop Footrest Extender /legrest Pad(Series 7032)
Drop-Stop is a footrest extender designed to prevent foot drop in people who use wheelchairs. The modular extenders create a platform which enables footrests on footrests and geri chairs to be raised from one to four inches to provide improved positioning, sliding control, and weight distribution. The included padded legrest cushion prevents the user's feet from sliding off the footrests. DIMENSIONS: Available in 16- and 18-inch widths and in a choice of one, two, three, or four inches high.
Abduction Wedge (Model 703075)
The Abduction Wedge, model 703075, is a abductor designed for use by individuals who use wheelchairs. This high-density foam wedge controls abduction contracture caused by sitting with the knees together for long periods. This wedge features Velcro straps for secure positioning and a removable, washable fabric cover.
Gull Wing Knee Separator (Model 703077)
The Gull Wing Knee Separator, model 703077, is a knee separator designed for use by individuals who use wheelchairs. This durable plastic frame holds the knees in abduction and interior foam padding provides comfort. Velcro straps adjust for each leg and keep the device securely in position. The frame can be adjusted using a heat gun.
Gel-Foam Thin-Line Pad (Models 751040 & 751045)
The Gel-Foam Thin-Line Pad is a lightweight gel flotation seat cushion designed for use in wheelchairs. This cushion features a high-density foam base with a separate pressure-reducing gel pad on top. A removable, washable incontinence-proof polyester cover is included. The cushion is equipped with safety ties that permit it to be secures to the whelchair frame to prevent slipping. Model 751040 is a standard cushion and model 701045 has a firm foundation. DIMENSIONS: Model 751040 is 16 x 18 x 1.
Dispos-A-Cuff (Models 306040, 306041, 306048, & 306049)
Dispos-A-Cuff is a limb restraint designed to prevent individuals with cognitive or emotional dis abilities from injuring themselves or others. Model 306040 is foam with a single tie strap and model 306041 is foam with double tie straps. Model 306048 is synthetic sheepskin with a single tie strap and model 306049 is synthetic sheepskin with double tie straps.
Skil-Care Resident-Release Soft Belts (Series 3012)
Skil-Care Resident-Release Soft Belts series 3012,are wheelchair seatbelts designed to provide security and positioning assistance. These launderable foam padded belts are available with a choice of four closures: Side-release buckles, user-friendly buckles, Velcro, and Velcro with a red hand loop. Foam padded belt easily attaches to wheelchair kick spurs.DIMENSIONS (padded front) (LxW): 24 x 4 inches. Overall length is 81 inches.
Skil-Care Resident-Release Nylon Belts (Series 7010)
Skil-Care Resident-Release Nylon Belts, series 7010, are wheelchair seatbelts designed to provide security and positioning assistance for people who use wheelchairs. These belts secure to the wheelchair using the existing screws and are available with a choice of four closures: Side-release buckles, user-friendly buckles, Velcro, and Velcro with a red hand loop. DIMENSIONS: All models are two inches wide. The model with the side-release buckle is available in 42 or 54 inches long. The model with
Wheelchair Armrest Cushions (Models 703015, 703016, & 703130)
The Wheelchair Armrest Cushions are wheelchair armrest pads designed for use by individuals who use wheelchairs. These foam-padded nylon-covered pads attach to the armrests with Velcro fasteners and provide protection against pressure sores and comfort for sensitive arms and elbows. Model 703015 is designed for chairs with full-length arms and model 703016 is designed for chairs with desk-length arms. Model 703130 is an extended cushion that extends beyond the armrest and covers the armrest post
Synthetic Sheepskin Wheelchair Accessories (Models 703010, 703020, 703040, & 703050)
The Synthetic Sheepskin Wheelchair Accessories are a set of wheelchair armrest and legrest pads and seat and back cushion covers designed to provide comfort and protection for people who use wheelchairs. All items are made of high-pile synthetic sheepskin and are nonallergenic. Model 703010 is a pair of wheelchair armrest pads, model 703020 is a wheelchair legrest pad that fits between and over the legrests, model 703040 is a pair of footrest pads, and model 703050 is a set of a wheelchair seat
Cozy Seat (Models 703005 & 703006)
The Cozy Cushion is a combination foam seat and back cushion with attached armrest pads designed for use with wheelchairs. This one-piece unit is covered in soft brushed poly and padded with high-density foam and prevents skin contact with a wheelchair's vinyl upholstery and metal parts. Covering the seat, back, and armrests, the Cozy Cushion permits use of seatbelts and positioning belts. SIZES: Model 703005 fits 16-inch wide chairs and 703006 fits 18-inch chairs.
Urinary Drainage Bag Holder (Model 102010)
The Urinary Drainage Bag Holder, model 102010, is a catheter collection bag cover designed for use by individuals with urinary catheters who use wheelchairs. This vinyl bag hangs below wheelchair seats and geri chairs or from bed rails with the attached straps and conceals the collection bag and stores tubing. OPTIONS: available with clear window bag. SIZES: One size accommodates all drainage bags.
Split-Rail Vinyl Bed Rail Pads (Model 401080)
The Split-Rail Vinyl Bed Rail Pads are side rail pads designed to provide protection from injury from bed rails. These pads are designed for use on divided bed rails. These foam-padded, vinyl-covered pads cover the rails and extend below and between the rail and the mattress for added protection. Velcro closures secure the pads to the rails. These pads wipe clean. DIMENSIONS: 9 x 1 x 28 inches.
Roll-Control Bolsters
The Roll-Control Bolsters are body positioners designed to provide secure positioning for individuals with physical disabilities. Intended for individuals who lie on their sides, these vinyl-covered, foam-padded bolsters eliminate the need for propping with pillows and prevent arms and legs from being caught between the mattress and side rails. Attached straps secure the bolster to the bed and aid in positioning. The bolsters are latex free. DIMENSIONS (LxW): 34 x 8.5 inches.
Positioning Wedges (Models 554010 & 554020)
The Positioning Wedges are body positioners designed to promote proper hip and spine alignment for people with back and lower extremity disabilities. These foam wedges also reduce sacral pressure to prevent or aid in healing pressure sores. Model 554010 comes with a cloth cover and model 554020 comes without a cover. DIMENSIONS: The wedges are 8 x 8 x 17 inches.
Tlc Turn-And-Lift Pad (Model 557001)
The TLC Turn-and-Lift Pad is a transfer aid designed to assist caregivers in turning and positioning individuals with physical disabilities in bed. This pad has a brushed tricot top layer, a middle layer of absorbent foam, and a bottom layer of urine-proof vinyl. Attached loops aid in turning and positioning. DIMENSIONS: 40 x 40 inches
Pouch Arm Sling (Models 902011 & 902012 )
The Pouch Arm Sling is designed for use by individuals with upper extremity injuries or disabilities. This durable, machine washable sling extends from the middle of the hand and wraps around the elbow to provide even weight distribution for either arm. The adjustable shoulder strap features a non-slip buckle. SIZES: Model 902011 is small/medium and model 902012 is medium/large.
Gel-Foam Pad (Models 751010, 751011, & 751012)
The Gel-Foam Pad is a gel flotation seat cushion designed for use in wheelchairs. This cushion features a high-density foam base with a separate pressure-reducing gel pad on top. A removable, washable incontinence-proof polyester cover is included. The cushion is equipped with safety ties that permit it to be secures to the whelchair frame to prevent slipping. DIMENSIONS: Model 751010 is 16 x 16 x 2.5 inches; model 751011 is 16 x 18 x 2.5 inches; model 751012 is 16 x 20 x 2.5 inches.
Modesty Apron (Model 707030)
The Modesty Apron is a lap robe designed for use by women who use wheelchairs. Made of durable wash-and-wear material, this large wheelchair apron extends below the knee and has a large front pouch pocket and a waist belt that secures behind wheelchair. SIZES: One size fits most.
Convoluted Wheelchair Cushions (Series 755)
The Convoluted Foam Cushions, series 755, are foam seat cushions designed to provide pressure relief for individuals who use wheelchairs. The eggcrate-style foam cushions are available without a cover or with a choice of a polyester fabric or synthetic sheepskin cover. DIMENSIONS: The cushions are offered in 16 x 18 x 3 inches or 16 x 18 x 4 inches.
Triple-Ply Heel Pad (Model 503010)
The Triple-Ply Heel Pad, model 503010, is a heelprotector designed to prevent pressure sores. Made of triple-ply synthetic sheepskin, this laundrable protector cups the heel and features side vent holes to promote air flow and reduce moisture build-up. An anle strap with Velcro closure ensures a secure fit.
Synthetic Sheepskin Bed Rail Pads (Model 402010)
The Synthetic Sheepskin Bed Rail Pads, model 402010, are side rail pads designed for use with hospital bed rails. Made of health-care grade, high-pile synthetic sheepskin, these pads cover the sides and top of the rails. The launderable, hypo-alergenic pads secure at the top with heavy-duty snaps and at the bottom with ties. DIMENSIONS: 18 x 60.
Roll Belt (Model 301300)
The Roll Belt, model 301300, is a belt restraint designed to enable individuals with cognitive disabilities to change position in bed while preventing them from leaving the bed. This laundrable belt features extra-long straps that secure ubder the bed. SIZE: One size fits most.
Safety Ponchos (Series 3000)
Safety Ponchos, series 3000, are vest restraints designed to prevent individuals with cognitive disabilities or who are in danger of falling from leaving a wheelchair independently. Available in CooLine mesh or poly weave fabrics, these ponchos feature deep square necklines, are pulled on over the head, and secure at the waist behind the wheelchair. SIZES: Small/medium and medium/large.
Cushion Belt (Models 301200 & 301201)
The Cushion Belt is a belt restraint designed for use with wheelchairs and geri chairs. This foam-padded belt is launderable. Model 301200 secures behind the chair with ties and can also be used in bed. Model 301201 secures behind the chair with an easy-release buckle and cannot be used in bed. SIZE: Both models are one size fits most.
Safety Vest (3000 Series)
The Safety Vest, series 4000, is a vest restraint designed for use with wheelchairs and geri chairs. Available in a choice of Cooline mesh or poly weave fabric, the vest croses over the chest, features a deep V neckline, and secures at the waist behind the chair with ties. SIZES: Small, medium, or large.
Padded Mitt (Model 306110)
The Padded Mitt, model 306110, is a hand mitt designed to prevent individuals with cognitive or emotional disabilities from scratching, hitting, or otherwise injuring themselves. These lightweight padded mitts have Cooline mesh covers, easy closure, and may be used with or without the included with arm restraint straps. SIZES: One size. DIMENSIONS: .75 inch thick.
Skil-Care Gel-Foam Recognition Pads
Skil-Care Gel-Foam Recognition Pads provide a picture story of familiar scenes to most children. Using these familiar settings, a child is encouraged to perform associations including color, shapes, size, function, numbers and placement. The Skil-Care Gel-Foam Recognition Pads can be used to assist with cognitive training, visual perception, number recognition and tactile awareness. Sold as a set of three. Available scene options are Suburb Scene, Farm Scene, City Scene, and Expression which all
Bi-Fold Sensor Pad For Chair And Bed
The Bi-Fold Sensor Pad is a discrete sensor that alerts a caregiver when their patient has fallen from their bed or chair. This dual purpose sensor pad can be folded. In it’s folded format the pad measures 15 inches wide x 15 inches long and can be placed on the wheelchair either above or below the seat cushion. In the unfolded position it measures 15 inches wide x 30 inches long and can be placed under or over the mattress. The pad is liquid resistant.
Safeside Fall Mat
The Safeside Fall Mat is a bedside mat that acts as a cushion in case an individual falls from their bed. The mat features a low profile/tapered edge design that allows for easy wheelchair roll-over and lessens the chance of stumbling while climbing into bed. The item can also be folded over once, creating a higher platform to reduce the impact of a fall.
One-Piece Econo Footrest Extender
The One Piece Econo Footrest Extender is an economical device that attaches to a wheelchair footrest for prevention of foot drop and feet from slipping behind the footrest. The raised footrest improves posture and allows for proper seating alignment. The cushioned back protects lower leg against contact with the wheelchair, and the device secures easily with quick-release straps.
Skil-Care Aqua Air Weights
The Skil-Care Aqua Air Weights use of resistive aquatic therapy is effective for strengthening the upper body and offers less risk of muscle strain than land-based exercise. The Skil-Care Aqua Air Weight is manufactured from non-allergenic chlorine resistant vinyl that dries quickly as to avoid wetting other items when packed. Designed with air valves that provide easy filling access, the weights can be filled by mouth or with an air pump. Weights are sold in cases of ten (10).
Ez Landing Fall Mat (Models 911585 & N911590)
The EZ Landing Fall Mat is a fall mat designed to protect individuals with balance or mobility disabilities. Intended to provide protection for individuals who are at risk of falling out of bed or while entering or exiting the bed, this one-piece mat features trip-resistant beveled edges; a low profile, stable surface; and nano-silver throughout which protects the mat from stains, odor-causing bacteria, mold, and mildew. DIMENSIONS (HxLxW): 1 x 68 x 30 inches or 1 x 68 x 24 inches.
Chairpro Underseat Alarm
The Chairpro UnderSeat Alarm is a wandering patient system and seating safety monitor designed for people with lower extremity, mobility and balance disabilities and other who use wheelchairs and have Alzheimer's disease, dementia or other cognitive disabilities. The ChairPro sounds an alarm when the user leaves the chair without assistance. Designed to fit all sling-seat wheelchairs up to 22-inches wide, this sensor alarm activates when the user rises and automatically resets once the person is
Ex-Box Resistance Trainer With Bands
Ex-Box Resistance Trainer With Bands is a resistance trainer for children with disabilities to build arm-leg coordination and provide a wide range of upper and lower body resistance and range of motion exercises. The user can use stretch tubing for exercising the legs, back, shoulders, and arms. Can be used in any fixed position chair or in a locked wheelchair. Accepts all levels of resistance bands and tubes. Easy attachment sockets permit quick adjustments.
Slip-Grip Non-Slip Matting
Slip-Grip Non-Slip matting may be used to prevent cushions from slipping off chairs; hold plates so that unsteady eaters can feed themselves; and position instruments on uneven surfaces. Keep everything in place or use it as a grip to open tough jars! Cut it to any shape or size, use everywhere in your home or facility. Colors coordinate with kitchens, baths, and bedrooms. Place under a slippery wheelchair cushion or under a floor mat on hard surfaces.