Category: Gross Motor Skills

Developmental Pull-Up Bar

AbleData does not produce, distribute or sell any of the products listed on this website, but we provide you with information on how to contact manufacturers or distributors of these products. If you are interested in purchasing a product, you can find companies who sell it below.

--- "DO IT YOURSELF" ENTRY -------
PURPOSE: Designed to allow children to work on developing their upper body strength with a pull-up bar. This pull-up bar takes gravity out of the equation by allowing the student to practice the same motion using a scooter and choices for difficulty. The child or teacher can select which height is best for the attempt. Children grab on to the bar while placing their bodies on the scooter (long scooters are easier than short scooters) and they pull up and release back down.

2 Inch PVC pipe, PVC elbows, PVC t's, 1/4 sheet of 3/4 inch plywood, 8 feet of 1/2 inch x 1 inch wood fern strips, 12-15 1 inch screws, PVC glue (optional), 1 scooter.

1.See Pictures for design of three level PVC bar.
2.If enough storage is available, glue all pieces together with PVC glue. If space is not available, the joints are able to be disconnected to fit in a smaller area.
3.The plywood ramp is about 40 inches long and 24 inches wide.
4.Putting a strip of wood on each side prohibits the scooter from falling off of the side.
5.Attaching two small strips of wood to the bottom of the ramp will prohibit the ramp from slipping off of the pipe.


Price Check
as of: 
Additional Pricing Notes: 

Estimated cost $10.00

Developmental Pull-Up Bar