AbleData does not produce, distribute or sell any of the products listed on this website, but we provide you with information on how to contact manufacturers or distributors of these products. If you are interested in purchasing a product, you can find companies who sell it below.
The Adjustable Back is a molded plastic backshell to fit 16, 18 or 20 inch width wheelchairs. The Back ($238) is two inches narrower than the wheelchair frame to fit between back uprights. It mounts to the wheelchair with an adjustable system which allows three inches of height adjustment and angle adjustment from upright to 15 degrees of recline. Mounting hardware ($266) is available to fit 3/4 inch, 7/8 inch, or 1 inch diameter frame tubing. It is easily removeable from the chair by retracting spring mounted pins. The Back is 30 inches high but can be trimmed to shorter heights. It is available in straight or kyphotic configuration. Molded polyurethane foam cushions ($84 to $25 each) fit into the backshell in various combinations, with 3 inch, 6 inch, 8 inch, 10 inch, and 15 inch flat and contoured sections.
print close directions